PRINTABLE - ML/E-23 TAMBOUR DOOR TRACK APPLICATIONS
***ALL ARE TOP VIEW ILLUSTRATIONS
FYI: You may need to do a print preview first and change the layout settings before printing.

Print this out and return back to the PVC & Aluminum Tambour Door Systems page. Below are illustrations of how our track can be installed for your Tambour Door. This will help you in the design process of the unit. The view is if you would be looking at the installation from the top down on a vertical operating door. A1 thru A7 are to reference our 7 different installation options.

A1
Basic Track
# T702823-001 or T702823-005
*Works with our Designs 1, 3, 4 & 5.


*Frameless Cabinet Top View.
*Vertical or Horizontal Applications.
*PVC Plastic – Less Expensive.
*Black or Silver Through Colors only.
*ML or E-23 Lines can be used.
*Can be set back any Distance.
*90 deg Corners are Available.
*Spiral Track can be used.

A2
Basic Track
# T702823-001 or T702823-005
*Works with our Designs 1, 2, 3, 4 & 5.

*Face Frame Cabinet Top View.
*Vertical or Horizontal Applications.
*PVC Plastic – Less Expensive.
*Black or Silver Through Colors only.
*ML or E-23 Lines can be used.
*Can be set back any Distance.
*90 deg Corners are Available.
*Spiral Track can be used.
*Design 2 - Roll-up can be custom designed to fit. See web-site.

A3
Aluminum Top Mounted Track Base
#T779510-001 & Matching Covers
*Works with our Designs 1, 2, 3, 4 & 5.

*Frameless Cabinet Top View.
*Vertical or Horizontal Applications.
*Aluminum – More Expensive.
*Matching Covers in all Colors.
*ML or E-23 Lines can be used.
*Can be set back any Distance.
*90 deg Corners in PVC Black only.
*Spiral Track can also be used.
If used on Design 2 with C3 Mechanism, the top rear of the track must be back-cut 2" & bent so the door will not catch when closing the unit.

CORNERS & SPIRALS
Below we are showing the Track Components that can be used with each of the installations above and right. Please see pictures and more info at web-site as well.



A4

Recessed Basic Track
# T779300-001
*Works with our Designs 1, 3, 4 & 5.

*Frameless or Framed Cabinet  Top View.
*Vertical or Horizontal Applications.
*PVC Plastic – Less Expensive.
*Black only.
*ML or E-23 Lines can be used.
*Can be set back any Distance.
*90 deg Corners are Available.
*Spiral Tracks can be used.
*Rout ½” Deep.



<<<<<<<<<
Flexible Recessed Track
#T779370-001
*Works with Designs 1, 5 or 6.


*Same Application Shown to the Left.
*Frameless or Framed Cabinet  Top View.
*Vertical or Horizontal Applications.
*PVC Plastic – Less Expensive.
*Black only.
*ML or E-23 Lines can be used.
*Can be set back any Distance.
*Spiral Tracks can be used.
*Rout ½” Deep. 4" min. radius
<<<<<<<<<<<


 

90deg Corners  Ref: A1 & A2 (above)
*PVC Basic Track
*Black or Silver *Does not match slats*

#T779950-001 & #T779950-005

90deg Corners  Ref: A3 (above)
*PVC Plastic Track Corners
*Has Tabs to Accept Matching Covers

#T779974-001   *Black only

90deg Recessed Corners  Ref: A4 (right)
*PVC Recessed Track Corners
#T779690-001   *Black only

Spiral Track  Ref: A1, A2 & A3 (above)
*PVC Surface Mount Spiral Track
*Has Tabs to Accept Matching Covers
*Black only 13-3/8" deep x 4-5/16"

#T779620-001 – (up to 49” capacity)

Spiral Tracks  Ref: A4 (right)
*PVC Recessed Mount Spiral Track
*Black only
T779730-001, T779750-001, T779770-001

 

 DESIGN 2 INSTALLATIONS USING OUR “ROLL-UP” C3 COUNTER BALANCE SYSTEM
& FOR OUR C3 KITS
      ***ALL ARE TOP VIEW ILLUSTRATIONS

Below are 3 different ways our Tambour Door Kits can be installed. The kits are measured to fit to your opening sizes. You can also research, order, cut and install the individual parts yourself. A6 & A7 require you to Fabricate and Install Blocking behind the Frame Mounted Track and for mounting the C3 Counter Balance System at the top of the cabinet.

A5
Aluminum Frame Mounted Track
#T7794550-001 & Matching Covers

Standard C3 Counter Balance System. See kits at site.
*Can be used with our other Designs as well but would be special order.

*Frameless Cabinet Top View.
More Expensive.
*Vertical Applications only.
*Will cover about 5/8”of Cabinet Face.
*Matching Covers in all Colors.
*ML or E-23 Lines can be used.
*90 deg Corners are NOT Available.
*Spiral Track cannot be used.

A6
Aluminum Frame Mounted Track
#T7794550-001 & Matching Covers

Used with our C3 Counter Balance System. See kits at site.
*
Can be used with our other Designs as well but would be special order.

*Face Frame Cabinet Top View.
More Expensive.
*Vertical Applications only.
*Matching Covers in all Colors.
*ML or E-23 Lines can be used.
*90 deg Corners are NOT Available.
*Spiral Track cannot be used.

A7
***MEASURING IS DIFFERENT FOR THIS INSTALLATION. THE BLOCKING NEEDS TO BE 1-3/16" SMALLER THEN THE OPENING,, (19/32" each side). THE SIZE WE NEED IS THE OPENING FROM FACE FRAME TO FACE FRAME EDGES.

Aluminum Frame Mounted Track
#T7794550-001 & Matching Covers

Used with our C3 Counter Balance System kits. See kits at site.
*Can be used with our other Designs as well but would be special order.

*Face Frame Cabinet Top View.
More Expensive.
*Vertical Applications only.
*Matching Covers in all Colors.
*ML or E-23 Lines can be used.
*90 deg Corners are NOT Available.
*Spiral Track cannot be used.

TYPES OF INSTALLATIONS:


Manual Lifting with Straight Tracks and 90deg Corners
This is our most popular design.

E-23 use Vertical Brake

Up to 55" width
*Up to 42" tall

 


C3 Counterbalance Lifting System with Frame Mount Track.
*Needs 6  to 8" Cabinet Space
on top and 11-1/2" Depth.

Frameless Design
Offered in our
PRE-MADE KIT
#
T779550-001
SEE TRACKS

Side mount also can be done using the basic track.
SEE TRACKS

20" to 53" width
(18-1/2" x 51-1/2" opening)
*24" to 82" tall


SEE C3 LIFTING SYSTEM

   
CLICK EXAMPLES

DOWNLOADS:
C3 Components List - Frame Mounted Track.xls

Design 3
C6 ***Cut out picture to show the Budgie Cord that is hidden. Door
is installed like our Design 1. 

C6 Counterbalance.
*Mainly used with Design 1 ML Line doors with locks to help prevent the door from slamming down. See more info and instructions below in Step 6.

Up to 55" width
*Up to 42" tall

 



 Manual Operating Horizontal or Vertical Operating with Spiral Track. 1 or 2 Doors

Horizontal Maximum Sizes:
Up to (40" E-23) (44" ML) tall
Up to (64" E-23) (48" ML) wide
Sizes per each door

Vertical Maximum Sizes:
Up to 60" tall
up to 32" Width

SEE TRACKS


 Manual Operating Horizontal Operating with Straight Tracks and 90deg Corners.
1 or 2 Doors

Horizontal Maximum Sizes:
Up to (40" E-23) (44" ML) tall
Up to (64" E-23) (48" ML) wide
Sizes per each door

SEE TRACKS


Manual Operating Horizontal or Vertical Operating with Flexible Inset Track.

SEE TRACKS



CLICK EXAMPLE
CLICK EXAMPLES
1 or 2 Doors can be used with style 4, 5 & 6 as Horizontal Operating Designs.
Max. size per door for Horizontal Applications are:
ML Line: 55" wide x 41" tall
E23 Line: 63" wide x 41" tall

Back to: PVC & Aluminum Tambour Door Systems
TAPE-EASE     PO Box 816      Denmark, WI 54208
920-863-3571 or 1-888-443-3461      fax: 1-920-863-3570