E23 KITS QUOTE STEP 2

E23 STEP 2 Choose Standard Parts/Sizes (Left) <> or Custom Parts/Sizes (Right)
E23 Line - Standard Size Kits with Standard Parts - Review ALL PRE-CUT TO ONE OF OUR STANDARD OPENING SIZES	E23 Line - Custom Size Kits or with Custom Parts - Review PRE-CUT OR YOU CAN CHOOSE TO CUT IF NEEDED SOONER
After this step you will be able to pick all the options for your Standard Kit. Please see the Standard Kit information below to determine if you will be using a Standard Kit or will need a Custom Kit to the right. Note: If you're door needs a Lock, you must choose the Custom Kit to right. Our Standard Opening Sizes are shown here. This is the opening required for the complete kit to fit into. You may cut down the height to a specific size after you get the standard kit but the width cannot be altered. If you cannot make your cabinet to fit any of these sizes, you will need to get a Custom Kit to the right. REVIEW STANDARD OPENING SIZES HERE: Click Dropdown to see our Standard Kit Widths: Click Dropdown to see our Standard Kit Heights: E23 Line Standard Handles Used at the bottom of the door. A Mid-Grip Finger-pull will be added just above the handle for lifting. E23 Line Standard Kit Track options: A5 or A3 Top view of track and 3/4" vertical cabinet side shown. Can also be referred to as (A5 Face Mount) or (A3 Inset Mount) Both of these options will be available for a Standard Kit in the next step.	After this step you will be able to pick all the options for your Custom Kit. Please see the Standard Size Kit information to the left to determine if you will need a Custom Kit. E23 Line Custom Kit size options: (Sizes refer to your cabinet opening) Minimum Width: 13-1/2" - Minimum Height: 18" Maximum Width: 51-1/2" - Maximum Height: 80-1/2" Note: We will only provide Pre-Cut Kits up to 46-1/2" opening width. Design 2 doors over 46-1/2" opening sizes must be cut by the installer. E23 Line Custom Kit Handle options: Used at the bottom of the door for lifting. E23 Line Custom Kit Track options: A5 or A3 \| Lock Our 2 most popular Track options. *Top view of track and 3/4" vertical cabinet side shown. Can also be referred to as (A5 Face Mount) or (A3 Inset Mount) Both of these options will be available for a Custom Kit in the next step. More Track options are also available. See TRACK APPLICATIONS or continue for more information. More available Custom Options in the next step: LOCKS - BOW HANDLES - MID-GRIPS
CHOOSE E23 LINE- STANDARD PARTS/SIZES- CONTINUE >>> <<<BACK TO STEP 1	CHOOSE E23 LINE- CUSTOM PARTS/SIZES - CONTINUE >>> <<<BACK TO STEP 1

E23 LINE Polypropylene Plastic in Colors	E23 - DESIGN 2 - STEP 2 In this step you will decide if you will be going with one of our Standard Size Kits with Standard Parts, or, go with a Custom Kit. *Custom Kits will have added cost and lead-time for custom sizing.	DESIGN 2 Parts as shipped.
	*SO FAR, YOU HAVE CHOSEN DESIGN 2 & E23 LINE* E23 Line now is all provided in Polypropylene. This is a more "Green" plastic material and more widely accepted in sensitive environments.

E23 STEP 2 Choose Standard Parts/Sizes (Left) <> or Custom Parts/Sizes (Right)
E23 Line - Standard Size Kits with Standard Parts - Review ALL PRE-CUT TO ONE OF OUR STANDARD OPENING SIZES	E23 Line - Custom Size Kits or with Custom Parts - Review PRE-CUT OR YOU CAN CHOOSE TO CUT IF NEEDED SOONER
After this step you will be able to pick all the options for your Standard Kit. Please see the Standard Kit information below to determine if you will be using a Standard Kit or will need a Custom Kit to the right. Note: If you're door needs a Lock, you must choose the Custom Kit to right. Our Standard Opening Sizes are shown here. This is the opening required for the complete kit to fit into. You may cut down the height to a specific size after you get the standard kit but the width cannot be altered. If you cannot make your cabinet to fit any of these sizes, you will need to get a Custom Kit to the right. REVIEW STANDARD OPENING SIZES HERE: Click Dropdown to see our Standard Kit Widths: Click Dropdown to see our Standard Kit Heights: E23 Line Standard Handles Used at the bottom of the door. A Mid-Grip Finger-pull will be added just above the handle for lifting. E23 Line Standard Kit Track options: A5 or A3 Top view of track and 3/4" vertical cabinet side shown. Can also be referred to as (A5 Face Mount) or (A3 Inset Mount) Both of these options will be available for a Standard Kit in the next step.	After this step you will be able to pick all the options for your Custom Kit. Please see the Standard Size Kit information to the left to determine if you will need a Custom Kit. E23 Line Custom Kit size options: (Sizes refer to your cabinet opening) Minimum Width: 13-1/2" - Minimum Height: 18" Maximum Width: 51-1/2" - Maximum Height: 80-1/2" Note: We will only provide Pre-Cut Kits up to 46-1/2" opening width. Design 2 doors over 46-1/2" opening sizes must be cut by the installer. E23 Line Custom Kit Handle options: Used at the bottom of the door for lifting. E23 Line Custom Kit Track options: A5 or A3 \| Lock Our 2 most popular Track options. *Top view of track and 3/4" vertical cabinet side shown. Can also be referred to as (A5 Face Mount) or (A3 Inset Mount) Both of these options will be available for a Custom Kit in the next step. More Track options are also available. See TRACK APPLICATIONS or continue for more information. More available Custom Options in the next step: LOCKS - BOW HANDLES - MID-GRIPS
CHOOSE E23 LINE- STANDARD PARTS/SIZES- CONTINUE >>> <<<BACK TO STEP 1	CHOOSE E23 LINE- CUSTOM PARTS/SIZES - CONTINUE >>> <<<BACK TO STEP 1