Your Name:
Company:
E-MAIL
*Pls Doublecheck
Street: (Shipping)
City:
State:
Zip Code:
Type of shipping address?
Residence?
Commercial
Address?
*Required for all quotes.
Phone:
Fax:
Job Name:
QUOTE
INFORMATION:
Please describe here
as best as you can the area where you are
installing the Tambour Door.
Include the type of cabinet material
and what it is being used for. You may also e-mail us pictures. Ref.
Job Name please.
info@tapeease.com
Design 2 Custom Kits with Custom Parts:
E23 Line, now all in
Polypropylene Plastic
MAXIMUM OPENING SIZES FOR PRE-CUT KITS>>> 46-1/2"w x 80-1/2"h
2 choices below, Design 2:
I want a
Design 2 Custom kit, cut to size. Approximately 2 week production lead time.
I need this sooner
or it's over 46-1/2" opening width.
We
need to order all the parts and do the cutting & assembly ourselves.
_____________________________________________________________________________________________________________________________
1) Pick a Slat Profile &
Color:
ML
Line, Aluminum Clad - 3/4" Slat:
ML Colors:
Aluminum
Stainless
Steel
ML
Line, Aluminum Clad - 1" Slat
ML Colors:
Aluminum
Stainless
Steel
***Kits using the 1" Slat
will be 9%
more expensive then the 3/4".
____________________________________________________________________________________________________________________________________
2)
Enter your exact inside cabinet opening sizes where the unit(s)
will be installed:
*(The dimension entered for the Height shall include
needed space for the C3 Mechanism as well.)
*(Minimum Opening Sizes: 18-1/2"w
x 18-1/2"h) (Maximum Opening Sizes: 51-1/2"w x 80-1/2"h)
Qty:
Width:
Height:
Depth: (12" min.):
Qty: Width: Height: Depth: (12" min.):
Qty: Width: Height: Depth: (12" min.):
*If you have more
doors in Standard Opening Sizes, enter more here:
____________________________________________________________________________________________________________________________________
3) Bottom Handles &
Finger-Pulls:
*Combo-Grip Handle Profile:
Combo
Grip Handle
If there is no lock, this is usually the handle of choice for ML Kits.
*If a lock is needed, choose from
handles shown below.
*Locking Handle Profiles:
*Locking
Handle Profiles are needed if your door needs a lock or if you prefer
the look of this handle instead of the Combo-Grip shown above.
These handles will not "Lock" without adding one of our locks, "Locking Handle
Profiles" is simply our name of this handle. 3 Sided Cabinet Box
refers to a cabinet opening where the door is going to come down and rest
on a countertop, shelf or floor. 4 Sided is when you have 4 Sides to your
cabinet box as shown.
Locking
Handle Profile for 3 Sided Cabinet Boxes.
Locking
Handle Profile for 4 Sided Cabinet Boxes.
______________________________________________________________________________________
*Mid-Grip Finger-pull:
Mid-Grips generally have 2 uses for our tambour door
Kits. They can be used just above the locking handle or also on doors 58-1/2" and taller, 58-1/2" and taller
doors will automatically be produced with the Mid-Grip inserted half way up
the door unless you opt out below. This is so
the user does not have to bend down to open it. Just below, you can choose
these options.
My door is 58-1/2" or taller and I do not want the Mid-Grip
Finger-pull slat installed half-way up.
_____________________________________________________________________________________
Lifting Options:
Use the Mid-Grip Finger-Pull just above the Handle as show
above.
Include
our 5" Bow Handle, Installed
Include our 8" Bow Handle,
Installed
NOTE: BOW HANDLES WILL BE PRE-INSTALLED,
AT DOOR CENTER, WHEN ORDERING DESIGN 2 KITS CUT TO
SIZE.
Notes or questions on our handle options:
________________________________________________________________________________________
4) Will this be a locking
door?
Yes
No
NOTE: LOCKS CAN ONLY BE PRE-INSTALLED WHEN ORDERING DESIGN 2 KITS CUT TO
SIZE.
*IF YES & Cut to Size, LOCKS MUST BE PRE-INSTALLED. Specify
location below: "centered, or left or right of center"
Center
Left
of Center
Right
of Center
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
5) Is your cabinet Frameless
or Face Frame construction?
Frameless
Face Frame
*(Frameless cabinets will have only about 3/4" face
width on front and no frame mounted on the cabinet box, see A5 or A3 pictures below)
*(Face Frame cabinets will have a 3/4" thick wood frame
mounted on the cabinet box face, see A6 picture below)
________________________________________________________________________________________________________
6) Standard Kits Track Systems:
ALL TOP VIEWS OF SIDE TRACKS -
A5, A6 or A3 are our three choices below
A5/Frameless
Cabinet
A6/Face Frame Cabinet
A3/Inset
mount
*(A5 shows our standard installation for a
E23, Design 2 Kit mounted to a 3/4" wide Frameless Cabinet Side.)
*(A5 Face Frame Cabinet shows the track on a face frame
cabinet. The opening size is measured from the edge of the face frame.)
*(A3 shows if you are mounting inset on a
Frameless Cabinet. Used also for any inset mounting inc Face Frame.
The 3
Sided Cabinet Box Handle referenced above will always be used with the A3
track)
Notes or questions on our Track Systems:
_______________________________________________________________________________________________________
7)
Top Fascia or "Cover Profile"
*(A Top Cover Profile is included
in all of our Design 2 Tambour Door Kits)
Send extra Cover Profile material for other use. Quote Qty. 98" Lengths
_________________________________________________________________________________________________________
8) Quote shipping type:
Ground
2nd Day Air
Next Day Air
AM Delivery
(AM for Air options Only)
*Allow 1 - 2 Business Days for
order processing. Expedited requests will be given asap priority.
_________________________________________________________________________________________________________
