Veneer sheets, Tambour Doors Made to Measure, Curved Plywood, T-Molding, Cabinet Doors, Rehau Tambour, Edgebanding, Corbels, Rope, Antiques


   PRE-GLUED WOOD EDGEBANDING


                                 

PRE-GLUED WOOD VENEER EDGEBANDING

Price List
Smooth Sanded - Thick Glue Coating - 250' Rolls
New Technology in Finger Joints make them 50% less noticeable. They range from 6' to 12' apart within the roll.
Quality Veneers are used in our Edgebanding

TAPE EASE SUPPLY LLC - INDUSTRIAL QUALITY EDGEBANDING - NEW LOWER PRICES
PRICED RIGHT!!! Be aware of low cost, poor quality Wood Edgebandings that are making their way into the market lately.
With our 30+ years experience
in the industry, you can be assured you are getting a quality product at TAPE EASE SUPPLY LLC

QUICK SHIP ITEMS SHOWN IN YELLOW SHADE: 13/16" & 7/8" Red Oak, White Oak, Maple, Mahogany, White Birch, Cherry, Ash, Yellow Pine, White Pine, Hickory,  & Walnut.
*Some of these require percentage added to determine cost as shown below pricing table.
All others can ship out within 1 - 3 business days. (inquire)
ANY COMBINATIONS FOR QTY DISCOUNT

Red Oak, Maple, Okume, African Mahogany, Cherry, White Birch, Sapele,  Yellow Pine, White Ash, Alder, Anegre, Pricing
(More below)
STOCK REDUCTION SPECIAL WHILE SUPPLIES LAST- NOT INCLUDING 13/16" CHERRY
Size    Prices shown per each 1 - 4 Rolls 5 - 9 Rolls 10 - 19 Rolls 20 + Rolls
   5/8" x 250'
1-3 days to ship
$17.50 $14.50 $14.21 $13.92
13/16" x 250'
QUICK SHIP ITEMS ABOVE
CURRENT STOCK REDUCTION IN PROGRESS FOR OUR 13/16". TAKE 15% OFF 3+ ROLLS
(13) Clear White Pine, 25% off SALE
$18.50
STOCK REDUCTION
$15.72/3 roll min
$16.50
STOCK REDUCTION
$14.02
$16.17
STOCK REDUCTION
$13.74
$15.84
STOCK REDUCTION
$13.46
  STOCK REDUCTION SPECIAL WHILE SUPPLIES LAST-
NOT INCLUDING CHERRY AS WE ARE CONTINUING TO STOCK IN 13/16"
 
7/8" x 250'
QUICK SHIP ITEMS ABOVE
*NEW STOCK SIZE
$19.50 $17.50 $17.15 $16.80
1" x 250'
1-3 days to ship
$20.50 $19.50 $19.11 $18.72
1-1/4" x 250'
1-3 days to ship
$26.00 $23.50 $23.03 $22.57
1-1/2" x 250'
1-3 days to ship
$33.50 $31.50 $30.87 $30.25
1-5/8" x 250'
1-3 days to ship
$37.50 $35.50 $34.79 $34.09
2" x 250'
RED OAK, MAPLE & CHERRY ARE
QUICK SHIP ITEMS

ALL OTHERS: 1-3 days to ship
$45.50 $43.50 $42.63 $41.77
2-1/2" x 250'
1-3 days to ship
$66.50 $61.65 $58.46 $56.45
Red Oak, Maple & Cherry Only
2" x 50'
QUICK SHIP
1 - 2 Rolls 3 - 4 Rolls  
$21.33/roll $19.40/roll
15% off 13/16", 3+ rolls, STOCK REDUCTION SPECIAL WHILE SUPPLIES LAST - FOR ITEMS BELOW IN YELLOW ONLY
For White Oak & Poplar
  Add 10% (x 1.10)

For, Walnut, Steamed Beech, Hickory Clear White Pine &
Douglas Fir:
Add 15% (x 1.15)

Teak:  Add 50% (x 1.50)

Zebrawood, Wenge, Light Bamboo, Dark Bamboo & More by Quote
Other widths and specie by quote, please
E-MAIL US
 

Samples


Many other widths and cuts available
Special order widths from 5/8" to 7", E-MAIL US for a quote

See some of our tools for edgebanding shown below..............
 

AU-93 DOUBLE EDGE TRIMMER $23.00ea
*Case quantities of 6*Case quantities of 6
(not required)       dbbledg.JPG (1601 bytes)

AU-93-B AU-93 BLADES $14.00ea  (replaces the blades once in the tool)               
    *Case quantities of 6*Case quantities of 6 (not required)
(Trim edgebanding and veneer edges with ease)
(This tool comes apart for one side trimming also, this works better when working with wood veneers when tear-out occurs because
you can then choose the direction of the cut. You want to flow over wood-grain pattern rather than cutting into the wood-grain pattern
)

 The arrow indicates the correct cutting direction. ____________________________________________

Edge Trimmer                   Follow same directions above for ET-6 & ET-7
ET6 18.40ea For straight panels *Case quantities of 6 (not required)

Blades: $9.00ea   *Case quantities of 6 (not required) (replaces the blades once in the tool)

 
 
Edge Trimmer                   
ET7 $14.00ea *Case quantities of 6 (not required) (no blades available)
For curved panels

____________________________________________________________________

RC21E END TRIMMER $42.00ea   *Case quantities of 4 (not required)

           1RC21E.JPG (1608 bytes)  Perfect end  cuts on edgebanding
RC21E-B BLADES FOR END TRIMMER $17.00ea *Case quantities of 4 (not required)
(replaces the blades once in the tool) ______________________________________________________________

#V-300 Pressure Roller  $25.00ea (Left) *Case quantities of 5 (not required)
#J-Roller (Standard)-$16.00ea  (Right)  *Case quantities of 5 (not required)

Non-Marking Rubber Roller               PR.JPG (1581 bytes)        

Zinc Plated Solid Steel Handle

Comfortable Vinyl Grips

See more of our tools for edge trimming and slitting
A J-Roller works well for pressing on as the glue is cooling.

Go To Products Page

[CLICK HERE TO DOWNLOAD OUR ORDER FORM]     e-mail: info@tapeease.com

TAPE EASE SUPPLY LLC accepts credit card information by phone or by our secure fax and e-mail services.
We do not keep your Card info stored on our computer systems.
You can be assured that your information is safe with us.

          PO Box 816      Denmark, WI 54208        
920-863-3571 or 1-888-443-3461      fax: 1-920-863-3570
PLEASE NOTE: AT TIMES WE DO HAVE LIMITED PHONE SUPPORT, USING OUR FORMS OR E-MAILING IS BEST
Open 8am to 4:30pm central time - Monday - Thursday
 (Sales office closes at Noon on Fridays)
Pricing may change and if so, you will be notified before your order is processed,
E-MAIL US with any questions.
ęCOPYRIGHT 1999 - 2018 TAPE-EASE SUPPLY LLC.  All Rights Reserved. Unauthorized use or duplication prohibited.