TAPE-EASE 620
Green Bay Rd. Denmark, WI 54208
920-863-3571 or
1-888-443-3461 fax: 1-920-863-3570
We make it easy for you, just fill out one of our forms and submit for a quote. You may also E-MAIL us your sizes, or, you may copy and paste our form into your program, fill out and send as an e-mail attachment. The print-out information you receive back from us is exactly how your items will be made as illustrated on our web-site. Please DO NOT send photos by fax. Here is some instructions on how to price most of our doors. More info can be found on each of our door pages for specific types of our doors.
For Thermofoil or Veneered Center
Panel Doors go to that page to see info & order form.....
Instructions mainly apply to our 300
& 400 series 5pc Wood Cabinet Doors.
Step by step:
1. Doors & Drawer Fronts must be ordered as actual sizes, not opening sizes. Sizes must be in 1/16" increments. Quantity discounts apply for doors of any size, specie or style per order.
2. Standard overlay is 1/2" for the width (1" larger than the
opening) when using concealed hinges
. Height is your preference but usually the same. For pairs of doors, measure
opening and add 7/8". Then divide by 2. This will give you the width for
each door and your 1/2" overlay and will allow for a little extra hinge
adjustment.
1/4" overlay is standard for exposed hinges, this means that the door will
be a total of 1/2" larger than the opening when using exposed hinges.
3. Outside edge profiles E-103 & E-107 are 3/8" lip style. Please specify if the pairs of doors are to be edged on three sides only by indicating "BR" or "BL" next to the door size. If the doors are arched, please indicate if the doors are "butt left" or "butt right".
4. Doors 48" or more in height will automatically have a center rail
added unless otherwise specified on the order form. Doors made without a center
rail will not be guaranteed against warping, and will have an additional full
unit cost added. Drawer Fronts over 36" will have an extra unit cost
added.
Exception: Mitered doors over 48" high will not automatically have center
rails and will automatically have one full unit cost added. An additional unit
cost will be added for doors over 60" high with or without center rails.
An additional unit cost per foot will be added to doors over 60" High.
5. All doors over 23" in width will not automatically have a center stile added and will have one full unit cost added. These doors will not be guaranteed against warping. An additional unit cost per foot will be added to doors over 60" High.
6. Our cabinet doors require no packaging charges and are set in formed styro-foam packing then placed in a corrugated cardboard container. Our primary carrier is UPS and we ship all items at their rates. If an e-mail address is provided, you will receive a notification from UPS when your order ships with tracking info. Large orders must go common carrier.
7. All listed prices are for 12 or more doors. 4 or less add 35%, 11 or
less add 20%.
Quantity discounts apply for doors of any size, specie or style per order.
8. Door orders will be shipped in 10 to 12 business days for unfinished
doors.
Pre-finished doors will take 5 extra days. We can do rush orders also, see Pricing
Info.
9. All the door styles and profiles shown are all we have to offer. We cannot match other door manufacturers styles. We can do other wood specie by quotation only. We cannot do any other types of wood or styles other than what is shown at our site.
10. We offer sample doors for Company Displays or customers looking to order. The doors are 11-1/2" x 18-3/4" and can be ordered at a 30% discount. We do not recommend ordering one door from your project for a sample because the rest of the doors may not match it when completed. 100% of our customers are satisfied! Stain color sample chains can be ordered at a $20.00 cost per chain, and a $12.00 cost for each additional chain. Colors are also shown on our web page.
11. WOOD SPECIFICATIONS:
Standard Grade: Each panel will be selected for color and grain-matched
per door. Some of the natural characteristics of the wood will be considered
acceptable on the face of the door. each may have slight mineral streaks
blended into the wood and a few very small pin knots. The backsides will not be
selected for color nor grain-matched. Cherry may occasionally have gum spots on
the face and heartwood may be present on profiled edges or on the backside of
the door. Our hickory is a natural Hickory and will not be selected for color.
Soft Maple is not selected for color.
Premium Grade: Each piece will be hand-selected to ensure superior color
and grain match. Very few of the natural wood characteristics allowed in the
standard grade will be present in the premium grade. Premium grade is
recommended when using a natural or very light stain. The backsides will not be
selected for color nor grain-matched. We will add 20% to the cost of the job
for premium grade wood selection.
Paint Grade: This will be a random selection of soft Maple, and White Birch.
Paint grade wood is not selected `for color nor grain-matched. An MDF panel may
be specified in place of a solid wood panel, at no additional cost. All paint
grade wood will be priced the same as Soft Maple. If we are Painting the doors,
we will quote with MDF center panels only. If you want solid wood center
panels, we will not guarantee against cracking in corners.
Rustic Grade: Will have many variations such as mineral streaks,
sapwood, heartwood and some knots. Knots will be structurally sound, but could
have slight voids or cracks around them. Call for pricing and availability.
Note: Due to the properties of solid wood verses veneered material, it should
be noted that the 1/4" veneer core panel material used in our flat panel
doors will generally stain slightly darker than solid wood. If you need a
perfectly stain-matched flat panel door, we recommend you use a solid wood
reversed panel (P-204).
More info:
Remember, if you use standard, exposed
self-closing hinges, your total door size is 1/2"
larger than the opening
(1/4" overlay).
For concealed type hinges our standard
width is 1"
larger (1/2" overlay). The
height is 1/2" larger (1/4" overlay).
Width and height may be changed to your
preference. But must be specified.
We can have your doors pre-drilled for
concealed hinges.
We also supply Blum brand
Concealed Hinges.
For new dovetail drawer
boxes, the width is 1" smaller than the opening
and the height is 3/4" smaller.
Depth will be the same as your old
drawers or about 3" less than the
cabinet depth.
This will allow you to use easy glide self-closing drawer guides.
Measure your cabinet depth and choose
the size for the drawer guides,
They should be just longer than the
Drawer Box,
exact, or to the next smaller size.
These can mount to the side of
the cabinet and shims may have to be custom
made to fit flush with
the edge of the face-frame.
Once your order is placed with your approval, it is non-cancelable.
By: Dave Daus at Tape-Ease who has done kitchen cabinet refacing for
over 20 years.
You can e-mail him with
questions at info@tapeease.com
Ordering
It will be your responsibility to read through the acknowledgment
completely and advise your customer service representative of any changes as
soon as possible. Tape-Ease will do everything possible to accommodate changes,
but if the order is already in production you may be charged for changes or an
add-on order may be required.
Price Quotations
Requests for price quotes can be e-mailed or faxed to us and are usually
returned within 24 hours.
Production Schedule And Lead Times
All orders for full jobs (12 or more doors per order) received before 12:00
p.m. CST are scheduled for production in the order, which they are received.
Lead times may vary from week to week depending on our workload. Full jobs will
generally be shipped within 10 to 12 business days if ordered unfinished and 15
to 17 business days if ordered pre-finished.
All orders for odd jobs (less than 12 doors per order) received before 12:00
p.m. CST will be scheduled for production the same day they are received. Lead
times may vary from day to day depending on our workload. Odd jobs will
generally be shipped within 5 business days if ordered unfinished and 7
business days if ordered pre-finished.
Rush Orders
Orders requesting “Rush” service will be accepted based on our workload at the
time. All Rush Orders will have a 30% up-charge over the quoted price. Lead
times will be as follows:
Unfinished Orders
Odd jobs (1-11 doors) 2 business days.
Full jobs (12+ doors) 5 business days.
Pre-finished Orders
Odd jobs (1-11 doors) 4 business days.
Full jobs (12+ doors) 10 business days.
Warranty Policy
Tape-Ease will guarantee that all of its manufactured products will be free
from defect in material and workmanship for one year from the date of shipment.
Warp tolerance on doors will be 1/8” from diagonal corners, size tolerance will
be +/-1/32”. Tape-Ease will only be liable for products as ordered by the
customer and will not be liable for additional cost incurred by the customer
for finishing, installation, labor to remove the product nor labor to install
the new product. We will
except no liability for cracking of paint on doors at glue joints.
Replacement Policy
Please advise your customer service representative within 5 business days of
receiving the defective product. Tape-Ease may request the defective products
be returned for inspection. The boxes may need to be return to Tape-Ease
by the customer for our inspection. Please repackage the items in the same box
for safe shipment back to Tape-Ease. You can e-mail us digital pictures of
damage to save time on a damage or replacement claim. An order for replacement
products will be processed on a priority basis and shipped within 3-5 business
days. These items may be billed out pending the inspection of the defective items.
A credit will be issued against the invoice and any shipping charges incurred
subject to our inspection.
How To Calculate Cost For Most Of Our
Doors:
***This info mainly applies to our Raised and Flat Panel Doors for
figuring prices on your own.
*Note: Send us your info for
extra discounts and quick quotes. Use one of our forms at top of page.
*For more information on how to Calculate Cost and Measuring: CLICK HERE
*Round all calculations to the next
highest hundredth.
*Measurements are rounded to the next highest inch.
*An additional unit cost is added for doors over 23" wide or 60" high
with or without center rails.
HOW TO PRICE:
1. Measure your door, Length x Height in inches.
2. Divide by 144, = Square Footage.
3. Multiply the Square Footage by the sq. ft. for the type of wood you
need.
(The sq. ft. Cost is
located at the bottom each of the door pages.)
4. All prices are for 12 or more doors. 4 or less add 35%, 11 or less add 20%.
5. Also add in extras such as:
Finishing with
Clear-coat:
$4.65 / sq. ft. (See Colors
For Finished Doors)
Finishing with
Paint: $8.60
/ sq. ft.
Drill for Concealed
Hinges:
$1.60 / hole
5/4 Thick
add 25% to wood cost
5/4" = (1" Finish Thickness, E-104
edge only)-(Red Oak, Maple & Cherry Only)
Premium Grade
Lumber add
20% to full job cost