Veneer sheets, Tambour Doors Made to Measure, Curved Plywood, T-Molding, Cabinet Doors, Rehau Tambour, Edgebanding, Corbels, Rope, Antiques



 ***NOTICE of NEW CHANGES, you may need to "Allow Flash Player" -
  ***TAPE EASE SUPPLY will remain open through the Coronavirus Pandemic and are following governmental guidelines.

   ALUMINUM T-MOLDINGS

ALL 12' LENGTHS     REAL ALUMINUM T-MOLDINGS     ALL 12' LENGTHS
When ordering please give part number. Slot Cutters are shown at the bottom of this page.
We now show 3 categories below.

Use these descriptions for the items listed below:
(M) - Mill, as extruded (May Have Scratches)
(P) - Polished (Buffed Only)
(S) - Satin - Dull, Matte Finish with no die lines  (Velo Clear)
Can be cut in half or under 92" for savings on shipping charges.
(Cut Charge: $8.00/10pcs per order). No returns on any cut items.
We can also quote you full 12' lengths via Freight Truck .
E-MAIL US
First-Time orders less then $50.00 require a $8.00 service charge.

CUSTOM WIDTHS AND FINISHES ARE
NOT AVAILABLE
 
ALUMINUM FILLERS
Used in Flooring as well as any suitable application.  This T-Molding can be used on radii as little as 3".
See
T-Molding Tools for making "V" relief cuts in the barb when doing radii.

ALL 12' LENGTHS  Cannot go UPS, but can be cut to 92" or less for an $8.00/10pcs cut fee per order     ALL 12' LENGTHS

Quantity Polished
or Satin
Quantity Polished Quantity Polished
12' - 48' $2.67 ft 12' - 48' $2.67 ft 12' - 48' $2.67 ft
47' - 168' $2.59 ft 47' - 168' $2.59 ft 47' - 168' $2.59 ft
169' - + $2.51 ft 169' - + $2.51 ft 169' - + $2.51 ft

ALL 12' LENGTHS  Cannot go UPS, but can be cut to 4'& 8', or 2 - 6' sections for an $8.00/10pcs cut fee per order    ALL 12' LENGTHS

INTRODUCING:
  "NO NOTCH" ALUMINUM T-MOLDING
New more pliable product allows you to shape and form to many designs. These T-Moldings can be used on radii as little as 4".
Bend without the need making "V" relief cuts in the barb!!!
10% DISCOUNT FOR 600+ FT.
Quantity Mill Satin Quantity Mill Satin Quantity Mill Satin
12' - 48' QUOTE $4.51 ft 12' - 48' $2.97 ft $3.56 ft 12' - 48' $2.82 ft $3.77 ft
47' - 168' QUOTE $4.37 ft 47' - 168' $2.88 ft $3.45 ft 47' - 168' $2.73 ft $3.65 ft
169' - + QUOTE $4.24 ft 169' - + $2.80 ft $3.35 ft 169' - + $2.65 ft $3.54 ft
10% DISCOUNT FOR 600+ FT.
ALL 12' LENGTHS  Cannot go UPS, but can be cut to 92" or less for an $8.00/10pcs cut fee per order    ALL 12' LENGTHS

STANDARD ALUMINUM T-MOLDING
These T-Moldings can be used on radii as little as 3"
See
T-Molding Tools for making "V" relief cuts in the barb when doing radii.
Can be cut in half or 1- 8' & 1- 4' section for |
savings on shipping charges.
(Cut Charge: $10.00 per order). No returns on any cut items.
First-Time orders less then $50.00
require a $8.00 service charge.


We can also quote you on any length pieces you need.
E-MAIL US
CUSTOM WIDTHS AND FINISHES ARE NOT AVAILABLE 
Quantity Satin Quantity Mill Polished
or  Satin
12' - 48' $2.67 ft 12' - 48' $1.85ft $1.93ft
60' - 108' $2.59 ft 47' - 168' $1.79ft $1.88ft
120' - 588' $2.51 ft 169' - + $1.74ft $1.82ft
600'+ $2.43 ft
10% DISCOUNT FOR 600+ FT.

CURRENT OVERSTOCK:  2) 8' & 2) 4' Polished: $1.10ft *Must take all

**240' minimum and 4 week production time on Mill or Polished Finishes in ALU1957**
Quantity Mill Polished
or Satin
Quantity Mill Polished
or Satin
Quantity Polished
or Satin
12' - 48' $1.68ft $1.88ft 12' - 48' $2.01 ft $3.03 ft 12' - 48' $2.00ft
47' - 168' $1.62ft $1.82ft 47' - 168' $1.95 ft $2.94 ft 47' - 168' $1.94ft
169' - + $1.57ft $1.76ft 169' - + $1.89 ft $2.85 ft 169' - + $1.88ft
10% DISCOUNT FOR 600+ FT.
ALL 12' LENGTHS  Cannot go UPS, but can be cut to 92" or less for an $8.00/10pcs cut fee per order    ALL 12' LENGTHS
Quantity Mill Polished
or Satin
Quantity Mill Polished
or Satin
Quantity Mill Polished
or Satin
12' - 48' $2.67 ft $3.92 ft 12' - 48' $1.36 ft $2.00 ft 12' - 48' Minimums apply, Inquire $3.15 ft
47' - 168' $2.59 ft $3.80 ft 47' - 168' $1.32 ft $1.94 ft 47' - 168' $3.05 ft
169' - + $2.51 ft $3.68 ft 169' - + $1.28.ft $1.88 ft 169' - + $2.96 ft
10% DISCOUNT FOR 600+ FT.


 
Slot Cutters shown below.......
Quantity Mill Polished
or Satin
Quantity Mill Polished
or Satin
     
12' - 36' Inquire $3.15 ft 12' - 36' $1.75 ft $3.02 ft      
37' - 144'   $3.05 ft 37' - 144' $1.69 ft $2.93 ft      
145' - +   $2.96 ft 145' - + $1.64 ft $2.84 ft      
10% DISCOUNT FOR 600+ FT.
ALL 12' LENGTHS  Cannot go UPS, but can be cut to 92" or less for an $8.00/10pcs cut fee per order     ALL 12' LENGTHS

SLOTTER CUTTERS WITH ARBOR & BEARING
These router bit slotters will cut the right size groove for you: 
1/4" Shank    5/16" Bore   1/2" Cut
PART # NO. OF WINGS SLOT THICKNESS Cost   PART # NO. OF WINGS SLOT THICKNESS Cost
SJO55 2 .055" $45.00ea SJ7 4 .075" $55.00ea
SJO65 2 .065" SJ8 4 .080"
SJ1 2 .075" SJ9 4 3/32"
SJ2 2 .080" SJ10 4 1/8"
SJ3 2 3/32" SJ11 4 3/16"
SJ4 2 1/8" SJ12 4 1/4"
SJ5 2 3/16" SJ13 4 .065"
SJ6 2 1/4"      
SLOTTER CUTTERS , BLADE ONLY
These router bit slotters will cut the right size groove for you: 
1/4" Shank    5/16" Bore   1/2" Cut
PART # NO. OF WINGS SLOT THICKNESS Cost   PART # NO. OF WINGS SLOT THICKNESS Cost
SO55 2 .055" $36.00ea S7 4 .075" $45.00ea
SO65 2 .065" S8 4 .080"
S1 2 .075" S9 4 3/32"
S2 2 .080" S10 4 1/8"
S3 2 3/32" S11 4 3/16"
S4 2 1/8" S12 4 1/4"
S5 2 3/16" S13 4 .065"
S6 2 1/4"      
 

Go To Products Page



[
CLICK HERE TO DOWNLOAD OUR ORDER FORM
]    
e-mail: info@tapeease.com
(Please - no un-wanted solicitation e-mails will be accepted) (CLICK HERE TO MAKE SURE YOU RECEIVE OUR RESPONSE)

TAPE EASE SUPPLY LLC
accepts credit card information by phone or by our secure fax and e-mail services.
We do not keep your Card info stored on our computer systems. You can be assured that your information is safe with us.

          PO Box 816      Denmark, WI 54208        
920-863-3571 or 1-888-443-3461      fax: 1-920-863-3570 (If faxing, follow-up with an e-mail to confirm receipt)
PLEASE NOTE: AT TIMES WE DO HAVE LIMITED PHONE SUPPORT, USING OUR FORMS OR E-MAILING IS USUALLY BEST
Open 8am to 4:30pm central time - Monday - Thursday
 (Sales office closes at Noon on Fridays)
Pricing may change and if so, you will be notified before your order is processed,
E-MAIL US with any questions.
ęCOPYRIGHT 1999 - 2019 TAPE-EASE SUPPLY LLC.  All Rights Reserved. Unauthorized use or duplication prohibited.