Veneer sheets, Tambour Doors Made to Measure, Curved Plywood, T-Molding, Cabinet Doors, Rehau Tambour, Edgebanding, Corbels, Rope, Antiques



   STILE AND RAIL, PANEL PROFILES
       SORRY, DUE TO UNSTABLE MARKETS OUR PRICING MAY NOT BE CURRENT AT OUR WEB-SITE


CABINET DOOR PAGES  How To Order

Customer Testimonials | QUESTIONS | Refacing Tips | Pricing/Measuring info

      Our Door Construction | Door / Sample Starter Kit

GET QUOTE HERE>>>>>>> Online QUOTE Forms:
Door Quote Form
Molding/Drawer Boxes/Veneer etc. Form

Print Out Fax Form:
(Or copy/paste and send as attachment)
Door Quote Form

Molding/Drawer Boxes/Veneer etc. Form

Cabinet Door Form Instructions
Molding/Drawer Box Form Instructions

DOOR STYLES
Raised Panel Doors | Veneered Raised Panel | Flat Panel Shaker Doors
Thermofoil Doors | Drawer Fronts | Doors For Glass |
Other Custom Options
Appliance Panels | Mitered Doors | Applied Molding Doors | Quartered Circle Doors
Solid Wood Doors | 1 Piece MDF Doors | MDF Veneer Doors |
Wainscot Panels
MORE OPTIONS
Stile, Rail & Panel Profiles | Outside Edge Profiles | Drill for Concealed Hinges
Dovetail Drawer Boxes | Colors For Finished Doors | Wood Molding & Millwork
Face Frames |
Solid Wood Stock |  Veneers For Refacing
Fireplace Mantels
| Appliance Garages | Kitchen Accessories

DOOR STYLE,RAIL & PANEL PROFILES
See Our Door Construction for edge profile illustrations

DESCRIPTION OF OUR PROFILES 

A Center Panel Profile is not needed for our Flat Panel Doors.
 

STILE AND RAIL PROFILES (FOR FRAME DOORS ONLY)
Our Standard Rail Widths are 2-1/4". We can do other sizes to your liking.
 


SR-10

SR-20

SR-
35

SR-30FP

SR-40RP
(This profile runs the full length of the stiles)

SR-70
 
STILE AND RAIL PROFILES (FOR FRAME/GLASS DOORS ONLY)

SR-10G

SR-20G

SR-30FPG

SR-30RPG

SR-40G
(This profile runs the full length of the stiles)

SR-70G
SR-30FPG Matched Flat Panel Doors & SR-30RPG Matches Raised Panel Doors
 
CENTER PANEL PROFILES (FOR RAISED PANEL DOORS ONLY)

V-Groove Panels:
V-grooves can be added to any door style that does not already have them. Specify either the single V-Groove VGP-1, 2 or 3 to be added in info column. You may also specify the width between each groove.
These options are not done on any slab drawer fronts or raised center panels. They can only be done on Flat Panel Doors and drawer fronts, or doors with our solid wood center panel profile P-204.

(Cost per sq ft)

˝” spacing

1”

1 ˝”

2”

2 ˝”

$4.05

$3.90

$3.25

$2.85

$2.50


 Specify in the "Notes area"

BACK TO CUSTOM MADE CABINET DOORS
Go To Products Page



[
CLICK HERE TO DOWNLOAD OUR ORDER FORM
]    
e-mail: info@tapeease.com
(Please - no un-wanted solicitation e-mails will be accepted) (CLICK HERE TO MAKE SURE YOU RECEIVE OUR RESPONSE)

TAPE EASE SUPPLY LLC
accepts credit card information by phone or by our secure fax and e-mail services.
We do not keep your Card info stored on our computer systems. You can be assured that your information is safe with us.

          PO Box 816      Denmark, WI 54208        
920-863-3571 or 1-888-443-3461      fax: 1-920-863-3570 (If faxing, follow-up with an e-mail to confirm receipt)
PLEASE NOTE: AT TIMES WE DO HAVE LIMITED PHONE SUPPORT, USING OUR FORMS OR E-MAILING IS USUALLY BEST
Open 8am to 4:30pm central time - Monday - Thursday
 (Sales office closes at Noon on Fridays)
Pricing may change and if so, you will be notified before your order is processed,
E-MAIL US with any questions.
©COPYRIGHT 1999 - 2021 TAPE-EASE SUPPLY LLC.  All Rights Reserved. Unauthorized use or duplication prohibited.